1 / 7
#0137 V2 Flexible Fabric Tape Winder (Spooler) - Spiral Pattern — image 1
1 / 7

#0137 V2 Flexible Fabric Tape Winder (Spooler) - Spiral Pattern

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An easy and quick 2-part print that snaps together. No hardware needed.

Rating
5 / 5
Likes
36
Downloads
219
Makes
3
Views
723
Reviews
3

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like! 

**********

In this version, I made a few improvements:

  1. thinner walls and less bulky - faster print.
  2. Added a spiral pattern for visual interest.
  3. Eliminated the bump-out feature on the cap for the finger pocket - it's completely round now.
  4. Refined the rewind arrows.

2 variants of the Cap are provided:

  1. Arrow Style 1 - conventional
  2. Arrow Style 2 - triangles

Additional Design Variants are below:

  1. Winder with Lightning Pattern here.
  2. Winder with Diamond Pattern here.

What it fits:

Size
Tape Width (mm)
Length (cm/inches)
Thickness (mm)
Metal Tab Length (mm)
15-15012-15150/600.4511

 

Useful TIPS:

  1. PLA works fine for this model.
  2. Make sure your printer has the extrusion multiplier correctly calibrated.  If the nozzle over extrudes, it may make the cap not to spin freely.
  3. If you encounter the above issue, you can easily adjust down the extrusion multiplier around 0.5-1% (for both parts) to eliminate any binding - it only needs a little bit of clearance.
  4. For the smoothest operation (not required), apply some paraffin wax to the rim of the body, assemble and spin the assembly freely a few times to distribute the wax, then insert the tape measure to be wound.


If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

P.S. Please post some constructive feedback if you'd like to see something improved.

Tags