Odroid N2 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for Odroid 2N with a large heatsink that can be mounted on the bottom of the top of the case or on the wall.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a holder for Odroid 2N with a large heatsink that can be mounted on the bottom of the top of the case (or on the wall). It consists of two rails and one base. A hole on the side allows you to secure both parts against spontaneous ejection with simple pin (not included), but this was not necessary as the rails move tight.
Printed on MK3S+, 0.2mm SPEED profile.
It's not perfect, but the project in Freecad no longer allowed me to modify the holes, due to some error. Also some improvements might have been done, however, it was enough for my current need as it worked well.