Bluey & Bingo Bed (frame and mattress)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original bed frame and mattress based on the the popular Australian kids TV show, sized to fit the playset figures.
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 291
- Wydruki
- 1
- Wyświetlenia
- 2540
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found some cute doll furniture and then my kid and I got on a kick of adapting and printing them for their Bluey playset figures. Eventually, they wanted beds for Bluey and Bingo. Nothing looked quite right, so I fired up TinkerCAD and designed my own, referencing stills from the show.
If there's interest, I may design a modified mattress with a cut-out for tails so they can lay on their backs, but it seemed too complicated for a first go. :)
These are probably fine as generic doll house beds, too! Feel free to remix—I’d love to see what you come up with.
Print Settings
The bed prints flat in three pieces, to be assembled after printing.
Bed Frame
The pieces press-fit which may be fine for display, but I would highly recommend gluing, e.g. for play. I used Gorilla Contact Adhesive Clear Grip (like E6000 contact adhesive), and it worked much better than hot glue (which added too much bulk to the connections).
Feel free to tweak for your own printer/preferences, but I used:
- Layer height: 0.28mm
- Nozzle: 0.4mm
- Walls: 2
- Infill: 7% gyroid
- Bed adhesion: 4mm brim (recommended due to small details like bedpost finials)
Mattress
Feel free to tweak for your own printer/preferences, but I used:
- Layer height: 0.28mm
- Nozzle: 0.4mm
- Walls: 2
- Infill: 5% gyroid
- Bed adhesion: none