CR Touch + ADXL 345 4010 Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combination mounting for a CR Touch and an ADXL 345 sensor to sit in front of a 4010 fan.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this remix in order to fit the CR Touch and an ADXL345 on the modified printhead of my Anycubic Vyper. Due to the usage of the 4010 fan, this should work on a variety of printheads. To change the distance between the probe and bed CR Touch Spacers can be used.
The probe now sits 50 mm in front of the nozzle, so the bed mesh loses 50 mm of probing space, but for my use case this is fine, especially if you're working with adaptive bed meshes.
I added M3 heated inserts for the CR Touch as well as the ADXL 345.
The version “_withClearnce” has 0.4mm clearance between the fan grill and the bottom of it. This can (depending on your material and printer) be printed without supports but I recommend using a light support structure to keep it clean.
Print settings:
Material: Sunlu Pla+
Layer Height: 0.2mm
Walls: 5
Infill: Grid, 50% (I guess this can be reduced, but I wanted to keep it sturdy)