Spacer plate for two 2.5 inch HDDs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very basic custom plate to stack two (thick) 2.5" HDDs in a computer system.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
In the process of assembling a specific computer system, I needed to create a basic custom plate to assemble and stack two hard drives on top of each other.
For the published STL, I used distances from M3 screw center-to-center (please refer to the schema published in photo section) of :
- 18.50mm (fits for 2 thick HDD)
- 12mm
- 9mm (fits for 2 thin SSD)
Remark regarding Fusion360 model :
The Fusion360 (parametric) file for this model is available for modifications according to your needs.
Within the file, you simply need to adjust the value 'hdd_space_from_m3_center' to the required measurement.
In my case, I've set it to 18.50 because the hard drives were 2.5-inch thick platter drives.