The Emperor's Naked Raspberry Pi 2.5" SSD Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Is your SSD loose in a cord and dangling? With this build you can mount your SSD directly under your Raspberry Pi
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a known concept, there are already a few variants like these, but this is my take.
Needed items for assembly:
Left and right mounting rail.
4 M2.5x12 screws that goes into each screw hole on your Raspberry Pi down to the mounting rails
4 M3x12 screws to attach to the mounting rails and then down to the SSD.
4 M3 nuts between the mounting rail and the SSD
------------------------------
Worth to mention:
---
Works with and without heat sink cases(armor).
The gap between the bottom of the Raspberry Pi allows the air to circulate, cooling the bottom of the Raspberry Pi.