The Emperor's Naked Raspberry Pi 2.5" SSD Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Is your SSD loose in a cord and dangling? With this build you can mount your SSD directly under your Raspberry Pi
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 55
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a known concept, there are already a few variants like these, but this is my take.
Needed items for assembly:
Left and right mounting rail.
4 M2.5x12 screws that goes into each screw hole on your Raspberry Pi down to the mounting rails
4 M3x12 screws to attach to the mounting rails and then down to the SSD.
4 M3 nuts between the mounting rail and the SSD
------------------------------
Worth to mention:
---
Works with and without heat sink cases(armor).
The gap between the bottom of the Raspberry Pi allows the air to circulate, cooling the bottom of the Raspberry Pi.