1 / 1
FYSETC Portable ADXL345 Bed Mount - Print and Screw !
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10 Minutes print. Print, keep bed hot, don't remove the print from the bed, screw and calibrate.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
10 Minutes print. Print, keep bed hot, don't remove the print from the bed, screw using 2x m3 screws and calibrate.
Make sure bed adhesion is good to ensure good results.