The Ugly Stop Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's bulky, ugly, but it works. Designed to fit common quick clamps and f-clamps (e.g. irwin, jorgenson)
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a stop block for a table saw crosscut sled, designed so you can clamp it up with typical clamps.
4" high and 4" deep so you have space to align your pieces. Also has a tiny chamfer on the back side so chips/dust don't throw off its alignment. Though I included the f360 file so you can adjust as you see fit.
I printed it with 5 layers and decent infill so I can clamp it hard without having to worry.
Make sure your printer prints true, I had to do some skew correction to get things perfect.