1 / 2
The Ugly Stop Block
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's bulky, ugly, but it works. Designed to fit common quick clamps and f-clamps (e.g. irwin, jorgenson)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 44
- Makes
- 0
- Views
- 276
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a stop block for a table saw crosscut sled, designed so you can clamp it up with typical clamps.
4" high and 4" deep so you have space to align your pieces. Also has a tiny chamfer on the back side so chips/dust don't throw off its alignment. Though I included the f360 file so you can adjust as you see fit.
I printed it with 5 layers and decent infill so I can clamp it hard without having to worry.
Make sure your printer prints true, I had to do some skew correction to get things perfect.