USB PD / QC Trigger box - For CTP10 board - XT60 output
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small housing for the CTP10 USB Trigger board which outputs to a cheap XT60 connector.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 952
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
For the CTP10 board which can request various voltages from USB chargers supporting:
PD - Power delivery
QC - Quick charge
FCP - Fast charge protocol
AFC - Adaptive fast charge
Sorry about how the lid attaches (glue). I doubt I will ever remake this, but if I do, I will improve how the lid 'works'.
The XT60 slot is extremely tight. Ironically, the XT60 connector does not need glue. I suggest connecting a male connector to the female you are fitting for a better grip.
If you need to remove the XT60 connector, you can pull it out with some pliers.
This was printed with 0.15mm layer height - No supports
