USB PD / QC Trigger box - For CTP10 board - XT60 output
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small housing for the CTP10 USB Trigger board which outputs to a cheap XT60 connector.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 83
- Makes
- 0
- Views
- 954
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
For the CTP10 board which can request various voltages from USB chargers supporting:
PD - Power delivery
QC - Quick charge
FCP - Fast charge protocol
AFC - Adaptive fast charge
Sorry about how the lid attaches (glue). I doubt I will ever remake this, but if I do, I will improve how the lid 'works'.
The XT60 slot is extremely tight. Ironically, the XT60 connector does not need glue. I suggest connecting a male connector to the female you are fitting for a better grip.
If you need to remove the XT60 connector, you can pull it out with some pliers.
This was printed with 0.15mm layer height - No supports
