Wuxn WXR Linear Rail Z-Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Linear rail mounts for WXR 3D Printer
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 289
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed an upgrade for WXR Z-axis to Linear Rails.
Print in PETG with 30% cubic infill and 3 vertical shells.
Minimum Part List:
2 x MGN12H Linear Rails 300mm
14 x M3*12 Screws (8 for the coaster the rest for the rail mount)
6 x M3 half round “Roll In” T-Nut for 3030 Series Aluminum Extrusion Profile (for mounting the rails )
The original outer wheel bolts can be reused to mount the printed coaster housing of the rail. They need to be trimmed down in the middle to clear the rail. They are different on each side of the z-axis. The wheels on the inside don't really serve a purpose anymore - but are kept as they are a spacer of the structure and add additional support.
It requires minimum disassembly and is easy to upgrade. The hardest part is trimming the bolts down evenly towards the middle. Reduce at least 2mm of the diameter for about 30 mm in length in the middle of the bolts. They are still plenty strong. The threads of the bolts will barely pass the rail when you screw them in. Its tight but works fine once you are passed the threads.
Note: The rail is mounted so it stops exactly 20 mm below the z endstop!