Strong Carabiner with Snap-Lock (easy-to-print without support)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strong, easy-to-print carabiner without support with Snap-Lock
- Ocena
- 4,429 / 5
- Polubienia
- 25
- Pobrania
- 359
- Wydruki
- 6
- Wyświetlenia
- 804
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This project started after I easily broke the carabiner that held the container for poop bags during a walk with my dog. I wanted it to be stronger than the original, easy-to-print, and without support.
After designing the project in Fusion 360, during my print tests and many revisions, I realized that it was strong when printed at 100% infill. I then created 3 sizes of this Carabiner, as I will be using them for many projects at home, camping and any other activities.
New and extras :
- For better compatibility with certain printers, I doubled the tolerance of the Snap-Lock joint for all v2 files.
The 3 sizes are approximately:
Small: 50mm x 27mm x 4.2mm
Medium: 75mm 41mm x 6.3mm
Large: 100mm x 55mm x 8.4mm
Print instructions
Easy print, any material, I did it in PETG.
0.2mm layer height,
2 perimeters,
100% Infill
No supports needed.