1 / 6
Strong Carabiner with Snap-Lock (easy-to-print without support) — image 1
1 / 6

Strong Carabiner with Snap-Lock (easy-to-print without support)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Strong, easy-to-print carabiner without support with Snap-Lock

Rating
4.429 / 5
Likes
25
Downloads
359
Makes
6
Views
804
Reviews
7

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

This project started after I easily broke the carabiner that held the container for poop bags during a walk with my dog.  I wanted it to be stronger than the original, easy-to-print, and without support.

After designing the project in Fusion 360, during my print tests and many revisions, I realized that it was strong when printed at 100% infill. I then created 3 sizes of this Carabiner, as I will be using them for many projects at home, camping and any other activities.

New and extras :

  • For better compatibility with certain printers, I doubled the tolerance of the Snap-Lock joint for all v2 files.

The 3 sizes are approximately:

Small: 50mm x 27mm x 4.2mm
Medium: 75mm 41mm x 6.3mm
Large: 100mm x 55mm x 8.4mm

 

Print instructions

Easy print, any material, I did it in PETG.

0.2mm layer height,
2 perimeters,
100% Infill

No supports needed.

Tags