Faucet handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement handle for a ProLine (Mueller) model 105-404 PVC stop valve. It fits on a 12-point spline.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a PVC stop valve on an outdoor water line to drain the line for the winter. It is a ProLine (Mueller model 105-404). After 5 years, the handle became brittle and snapped off. This replacement faucet handle is a little larger and easier to grip. I printed this in PETG to better withstand the weather and sunlight.
- 1st layer height: 0.2mm
- Layer height: 0.3mm
- Nozzle size: 0.6mm (though 0.4mm should work as well)
- No supports
I used PrusaSlicr with default settings for Generic PETG, printed on a textured steel sheet. The first layer was a little bit of a mess but corrected itself with additional layers.