1 / 2
Crystal Steampunk Angel - Hueforge - Filament Painting — zdjęcie 1
1 / 2

Crystal Steampunk Angel - Hueforge - Filament Painting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

random idea that floated around and came into existence with img2go

Ocena
0 / 5
Polubienia
9
Pobrania
81
Wydruki
0
Wyświetlenia
1065
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This was just a random idea I had and was made possible with img2go. Theoretically possible to add colors but I stopped trying after an hour to make it work. Still pretty nice in b & w.

You can size it up or down in X & Y but don't change Z height, otherwise you need to figure out when to change filament and it might not work out.

I started adding stl to my models. Please keep in mind, depending on your machine, slicing takes from seconds to maybe a couple minutes. I use a 5600X and it takes about 30 seconds for this one while others literally takes 2 min+ or more.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu Matte Black
PLA Sunlu Matte Dark Grey
PLA Elegoo Matte Gray
PLA Eryone Light Grey
PLA Eryone Matte White


Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Gray 2.3
At layer #10 (0.88mm) swap to Gray
At layer #11 (0.96mm) swap to Gray
At layer #13 (1.12mm) swap to White for the rest.
 

Tagi