Crystal Steampunk Angel - Hueforge - Filament Painting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
random idea that floated around and came into existence with img2go
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 81
- Makes
- 0
- Views
- 1,065
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This was just a random idea I had and was made possible with img2go. Theoretically possible to add colors but I stopped trying after an hour to make it work. Still pretty nice in b & w.
You can size it up or down in X & Y but don't change Z height, otherwise you need to figure out when to change filament and it might not work out.
I started adding stl to my models. Please keep in mind, depending on your machine, slicing takes from seconds to maybe a couple minutes. I use a 5600X and it takes about 30 seconds for this one while others literally takes 2 min+ or more.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Matte Black
PLA Sunlu Matte Dark Grey
PLA Elegoo Matte Gray
PLA Eryone Light Grey
PLA Eryone Matte White
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Gray 2.3
At layer #10 (0.88mm) swap to Gray
At layer #11 (0.96mm) swap to Gray
At layer #13 (1.12mm) swap to White for the rest.