Luckyman Easy Peasy with Microswitch / Free ABL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thank you for clicking on my remix! In this remix i have built upon Luckyman's work on the EZ-PZ fan duct and my…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thank you for clicking on my remix!
In this remix i have built upon Luckyman's work on the EZ-PZ fan duct and my earlier [improved] version of that same duct to create a automatic bed leveling mount for a microswitch (creality style).
you can find the regular and [improved] versions in the following links:
[Regular] https://www.thingiverse.com/thing:4266711
[Improved] https://www.thingiverse.com/thing:4362762
List of improvements / changes: (compared to regular)
// Duct:
- [Change] I made the fan duct mounting points slightly shorter to make sure that it fits better into the bracket.
- [Change] I made the bevels of the duct a bit smaller because they were interfearing with my noctua fan.
- [Addition] I have intergrated a microswitch mount to mount a microswitch for bed probing. In firmware define it as a Fix mounted probe (no moving parts, just a simple switch)
//
PROBE OFFSET X Y Z
NOZZLE_TO_PROBE_OFFSET { 37.75, -12, 0.4 }
Z offset may vary
\
Feel free to remix this to improve it or post a comment if you have improvements you want to see.
Assembly
What to print
The following files will need to be printed if you want to mount this to your printer:
1. Either the [Improved] bracket or the Regular luckyman bracket (see links in description) 2. Print the Luckyman EZPZ Microswitch v1.2 (.3mf or .stl) 3. Print the Microswitch mount.How to assemble
After you have printed all files succesfully you need to preform the following steps:
- (duct) Remove the supports of the dovetail by just snapping them off
1.5 clean up any residue of filament that originated from the supports. 2. screw a microswitch on to the Microswitch mount. 3. Unscrew the currently attached cooling duct / fan mount 4. screw either the [Improved] bracket or the Regular luckyman bracket on to your X carriage. 5. Slot the Duct into the Bracket 6. Screw the fan onto your bracket 7. slot the microswitch mount into the top dovetail.
And you are ready to print.
How to probe
First of all i am going to show you the terms i will use.
The following is a image of the Idle and probing position
Idle position
(see photo below text)
Idle position
Probing position
(see photo below text)
Probing position
You use the probe position ONLY when you are ready to probe.
You use the Idle position when you are printing or not currently probing the bed.
Showcase
A video showcasing the microswitch / free-abl mount [may contain broken english]
Category: 3D Printer Parts