Luckyman [Improved] Easy Peasy Duct / Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thank you for clicking on my remix! List of improvements / changes: // Bracket: [Change] Made the existing mounting…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thank you for clicking on my remix!
List of improvements / changes:
// Bracket:
- [Change] Made the existing mounting holes larger to make the mount adjustable.
- [Change] made the Bracket holes slighly larger to make the M3 screws screw in better
- [Addition] I added a extra hole to make the mount more stable and to prevent the bracket moving away from the Carriage
// Duct:
- [Change] I made the fan duct mounting points slightly shorter to make sure that it fits better into the bracket.
Feel free to remix this to improve it or post a comment if you have improvements you want to see.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm (0.24mm works fine too)
Infill:
30%
Filament: AmazonBasics PETG Red Why this remix?
Why did I remix the Easy Peasy Parts cooler?
This remix was made to make the bracket and duct more adjustable for other hotends like micro swiss (and clones). Personally I own a triangle labs CR-10 all metal hotend (which I use for My ender 3).
* I noticed after printing the original bracket that the Duct itself ended up lower then the tip of my nozzle and the Bracket was interfering with my Silicone sock and heater block causing it to melt. * I also noticed that because of the bracket being secured on only one side it wanted to move away from the X-carriage, so i made a hole for the X-carriage wheel screw to go through.Those are the main two reasons why I made this remix.
Naming of the parts explained
// To prevent confusion i just put this section here to explain the naming.
- EZPZ: a shortened version of easy peasy.
- Bracket: This is the thing that will mount on to the carriage, this part has the mounting holes for the 40x10 which has the read and black wiring fan aka the fan that cools the (red) heatsink
- Duct: The duct is the part that will slot into the bracket and which will hold the 40x10 fan with the yellow and blue wires.
- R/R1/R2: The R stands for Revision and the number behind the R is the revision number so the bracket is the second revision because the previous version (which i made changes to) did not work the way i wanted to.
Category: 3D Printer Parts