Guitar amp key holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When you come home, plug in your keys and crank it up to eleven! Or maybe a bit lower if you're a good neighbor.
- Ocena
- 0 / 5
- Polubienia
- 73
- Pobrania
- 235
- Wydruki
- 0
- Wyświetlenia
- 2189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print the 3.5 mm keychain to plug into the ¼" adapter.
The backplate should be printed face down to avoid using supports and you can print the slot ends and glue to the ends of the backplate. I initially had the slot ends as part of the backplate, but that iteration required supports on either orientation.
I'd suggest using variable layer height to make the main vertical portion at 0.2 mm with 0.125 - 0.15 mm for the rest.
Infill at 10% or higher and supports of course for the slot.
You'll need to buy some hardware:
1.) 3.5mm to 1/4" jack adapter.
https://www.amazon.com/Pig-PA-ST35T-Stereo-Headphone-Adapter/dp/B017XYTHWW/ref=sr_1_20?dchild=1&keywords=1%2B4%2Binch%2Badapter&qid=1634525740&s=audio-video-accessories&sr=1-20&th=1
2.) Toggle bolts for mounting. You need these. You could hit one stud, but not 2. If you mount with something else, the amp could fall off from the pulling force when removing the keys.
3.) I used these tiny lettered decals:
https://www.amazon.com/gp/product/B000BRFD6I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
4.) Inputs:
https://www.amazon.com/gp/product/B0076CGVF8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I could design all but the toggle bolts to be printed but didn't think they'd be as sturdy, aesthetically pleasing, or satisfying when plugging in.