1 / 1
DUMMY 13 goes to COMIC CON - Locutus of borg V1.0 — zdjęcie 1

DUMMY 13 goes to COMIC CON - Locutus of borg V1.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

We are the DUMMY. Lower your shields and surrender. Your 3D printer will adapt to print us. Resistance is futile.

Ocena
5 / 5
Polubienia
164
Pobrania
450
Wydruki
2
Wyświetlenia
2562
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

20. Mar. 2024 V1.0:

  • First release

Based on DUMMY 13 Beta - Oct. 2023 

DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0

Get your Dummy 13 here: /model/593185

 

DUMMY 13 loves COMIC CON! 

So I have started to design a whole series of characters and costumes for DUMMY 13. This is another character from the series "DUMMY13 goes to COMIC CON".

The aim is to preserve the charm and simplicity of Dummy 13.


 Get more:  /@Mici/collections

----------------------------------------------------------------------------------------------------------------

Content of Locutus of DUMM, sorry Locutus of borg:

  • Mask
  • Head laser mount
  • Armor
  • Hand

Printing:

Please double check the provided 3MF file (Prusa Slicer).

 Layer heightBrimSupports
Mask0.10mm--
Laser mount0.10mm--
Armor 0.15mm--
Chest lower part0.15mm--
Hand (PETG)0.15mm--

Assembly:

Check and widen all holes with a piece of filament.

  • Mask:
    • Use a piece of TPU filament
    • Put on the laser holder
    • Push the end of the filament into the hole in the mask
    • Do not go too far. The inside of the mask MUST remain flat
    • Glue the mask to the head
    • Glue the laser holder onto the mask
    • Insert the other end of the filament into the back of the armor.
    • Use a piece of red filament as laser

 

  • Armor
    • Use two pieces of TPU filament and connect the two holes on the armor with the two holes on the lower chest
    • Use the length that gives you the best look
    • You will need tweezers
    • Use glue if necessary

 

Tagi