Starfield book end - fits on PRUSA MINI+ (SUPPORTLESS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this book end from game called Starfield. - Very simple assembly. - Supportless parts. - Easy to print.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 618
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
I created this book end from game called Starfield.
Assembly is simple:
Dry-fit pieces & glue them together.
Step 1:
Prepare your models with putty / spray paint and double check orientation of prins on side panels!
Step 2:
Glue top panel with main body. It's symmetrical, and should fit perfectly.
Step 3:
Time to connect the panels - glue the longer pin on one side and push with pencil for example so you don't glue your fingers ;)
Step 4:
This is the smaller pin of the same piece - notice how it connects. The pin is inside the model and fits just right through the split.
Step 5:
Just repeat same process on the other side and the model is finished.
Step 6:
Enjoy! (this step is required)
Expected print time (version 0.nothing) with Prusa MINI+ is about 3h45m hours with 0.2 Layer Height and stock slicer configuration.
If you have any suggestions, let me know. I can do similar models if you provide screenshots.
Be creative :)