Latch No-Strike Spacer for Jin Jun Lang JL-13A
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No more nickin' up your blade with the latch on this inexpensive flipper.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Niche problems require niche solutions.
The otherwise fairly competent Jin Jun Lang JL-13A balisong doesn't have any kind of overtravel stop for its latch. So it's possible – indeed likely – that at some point you will repeatedly bash the latch head into the edge of your knife.
This stops that. That's all it does.
Just take out the screws in the pocket clip and separate the handle halves on the bite side. Slip this over the spacer behind the latch, and slot the protrusion into the cutout on the handle. Now your latch can't rotate more than 180 degrees in total, which prevents it from contacting the blade. You can still latch the knife in both the closed and open positions.
Print it with the peg upwards, obviously. Print at whatever infill and out of whatever material you like. Your choices there are unlikely to affect much.