Cat Hammock Folding Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have the style of cat hammock shown in the picture, this attachment will allow your cat hammock to be folded up.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed model in both orientations shown, with supports, and it worked both ways and supposedly used about the same amount of filament either way. I used these print settings:
Infill: 50-60% infill with gyroid pattern (to ensure it was strong enough to hold up to the cat's weight)
Supports: Everywhere for 50deg
Build Plate Adhesion: Raft
I attempted PETG filament, but it failed multiple times, so the filament shown is white PLA. I think it blends in nicely with the PVC frame.
Attachment: To attach the pieces to the hammock, start out by using some pliers to squeeze the cylindrical part of the suction cup until you can get the U shaped end over, lining up the pegs with the little holes on the side. Once you've done this for both, press the circle end into the PVC frame on both ends. Rotate it so that it's flat. Now attach the suction cups as usual, and you have a folding kitty hammock. :)