1 / 5
Cat Hammock Folding Attachment — image 1
1 / 5

Cat Hammock Folding Attachment

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If you have the style of cat hammock shown in the picture, this attachment will allow your cat hammock to be folded up.

Rating
0 / 5
Likes
6
Downloads
21
Makes
0
Views
253
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial

I printed model in both orientations shown, with supports, and it worked both ways and supposedly used about the same amount of filament either way. I used these print settings:

Infill: 50-60% infill with gyroid pattern (to ensure it was strong enough to hold up to the cat's weight)

Supports: Everywhere for 50deg

Build Plate Adhesion: Raft

I attempted PETG filament, but it failed multiple times, so the filament shown is white PLA. I think it blends in nicely with the PVC frame.

Attachment: To attach the pieces to the hammock, start out by using some pliers to squeeze the cylindrical part of the suction cup until you can get the U shaped end over, lining up the pegs with the little holes on the side. Once you've done this for both, press  the circle end into the PVC frame on both ends. Rotate it so that it's flat. Now attach the suction cups as usual, and you have a folding kitty hammock. :)