SeCopter 250 - Quadcopter Frame V1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First version of my 3D Printed Quadcopter frame. The configuration is currently for the parts which I still had laying…
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 1114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
First version of my 3D Printed Quadcopter frame. The configuration is currently for the parts which I still had laying around at home:
- KK2 board (http://www.hobbyking.com/hobbyking/store/\_\_54299\_\_Hobbyking\_KK2\_1\_5\_Multi\_rotor\_LCD\_Flight\_Control\_Board\_With\_6050MPU\_And\_Atmel\_644PA.html?strSearch=kk2)
Multistar Motor and Afro ESC set (http://www.hobbyking.com/hobbyking/store/uh\_viewitem.asp?idproduct=76071)
Since the weather is currently bad I did not yet have the chance to fly it outside. Indoor test flights were performed and very successful. The goal for this design was to create a very stiff but light frame. Currently the design might still be a little overkill but I will optimize that in future designs. The landing gear is snap on and should not damage the frame in a crash.The current total weight including a 1200mAh battery is 460g.
If you have suggestions, wishes or comments just let me know.
Print Settings
Printer Brand:
RepRap
Printer:
Mendel90
0.2mm
Infill:
15%
Notes:
In order to increase the stiffness have at least 0.5mm of solid top and bottom solid thickness. I used 3 layers for my 0.2mm print.
Category: R/C Vehicles