SeCopter 250 - Quadcopter Frame V1.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
First version of my 3D Printed Quadcopter frame. The configuration is currently for the parts which I still had laying…
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 62
- Makes
- 0
- Views
- 1,114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
First version of my 3D Printed Quadcopter frame. The configuration is currently for the parts which I still had laying around at home:
- KK2 board (http://www.hobbyking.com/hobbyking/store/\_\_54299\_\_Hobbyking\_KK2\_1\_5\_Multi\_rotor\_LCD\_Flight\_Control\_Board\_With\_6050MPU\_And\_Atmel\_644PA.html?strSearch=kk2)
Multistar Motor and Afro ESC set (http://www.hobbyking.com/hobbyking/store/uh\_viewitem.asp?idproduct=76071)
Since the weather is currently bad I did not yet have the chance to fly it outside. Indoor test flights were performed and very successful. The goal for this design was to create a very stiff but light frame. Currently the design might still be a little overkill but I will optimize that in future designs. The landing gear is snap on and should not damage the frame in a crash.The current total weight including a 1200mAh battery is 460g.
If you have suggestions, wishes or comments just let me know.
Print Settings
Printer Brand:
RepRap
Printer:
Mendel90
0.2mm
Infill:
15%
Notes:
In order to increase the stiffness have at least 0.5mm of solid top and bottom solid thickness. I used 3 layers for my 0.2mm print.
Category: R/C Vehicles