Activated charcoald container for Petsafe Drinkwell Platinum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable and reusable container for the cat/pet fountain Petsafe Drinkwell Platinum. Might work for Drinkwell Original.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pay attention to print setup (see the screenshot), as the mesh is created by slicer and not modeled in CAD.
NB: There is a tiny nub modeled in drinkwellplatinum_ezbox_up.3mf – make sure the nub is on the up side. You might need to turn that part over in slicer.
Please use food-contact certified filament. I'm using Fillamentum CPE HG100 Natural (clear), but there are many alternatives.
The charcoal should be around mesh size 8x4 (2.4 - 4.5 mm). You can adjust the mesh size of the printed container a bit but if you go too fine, the pump will not be able to overcome the backpressure induced by the mesh. Experiment if you want :)