Activated charcoald container for Petsafe Drinkwell Platinum
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable and reusable container for the cat/pet fountain Petsafe Drinkwell Platinum. Might work for Drinkwell Original.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pay attention to print setup (see the screenshot), as the mesh is created by slicer and not modeled in CAD.
NB: There is a tiny nub modeled in drinkwellplatinum_ezbox_up.3mf – make sure the nub is on the up side. You might need to turn that part over in slicer.
Please use food-contact certified filament. I'm using Fillamentum CPE HG100 Natural (clear), but there are many alternatives.
The charcoal should be around mesh size 8x4 (2.4 - 4.5 mm). You can adjust the mesh size of the printed container a bit but if you go too fine, the pump will not be able to overcome the backpressure induced by the mesh. Experiment if you want :)