Dish Rack - The Drying Elephant - Dish Dryer Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Are you also doing your dishes by hand? Well I do and i got really tired of drying my cutlery by hand and i had…
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 321
- Wydruki
- 1
- Wyświetlenia
- 2623
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Are you also doing your dishes by hand? Well I do and i got really tired of drying my cutlery by hand and i had nowhere to place them...
So I designed this elephant, inspired by Peleg Design.
It uses a channel and angle on the inside to let water flow outwards from the snout of the elephant. Prints best with solvable materials (PVA + PLA for example). The inside is OK without support, but the legs are right now a mess to remove PLA if you use only 1 extruder. I will update this shortly!
Print Settings
Printer:
Flashforge Dreamer
Rafts:
Doesn't Matter
Yes
Resolution:
0.1-0.3
10-15
Notes:
You can use a single extruder and get good result!
I printed with Orbi-tech PVA as support material, solved in cold water overnight.Post-Printing
Clear coat = waterproof
Using 2-3 layers of clearcoating (quite excessively on the inside) the model is fully waterproof and all the water left on the cutlery, channeling it out from the snout.
How I Designed This
Designed using 3ds Max
Custom Section
See how everything was made!
Category: Kitchen & Dining