Dewalt Table saw table stand foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the Dewalt table saw - stand foot (Rubber Foot 5140032-87) for the table stand (DW7440RS).
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
This is a replacement for the Dewalt table saw - stand foot (Rubber Foot 5140032-87) for the table stand (DW7440RS).
After about 8 years the original rubber feet failed and fell apart. Instead of paying over $30.00 for the replacement part, that will fail again, I figured I would just make one. The dimensions are a tight fit to keep the parts from moving around on the saw and allowing the nuts to stay within the part.
You will need to print 2 of these to replace both of the original feet. To install, remove bolts and nuts, remove old feet, remove inner plastic cap from steel pipe, install new feet, install inner plastic cap, install nut and bolts, tighten bolts to pull nuts into part.
Made in Tinkercad. Printed with TPU. 6 layer lines 25% infill.