Mac SE and SE/30 BlueSCSI v2 Expansion Port Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket for the Mac SE and SE/30 to mount a BlueSCSI v2 in the expansion port for easy SD card access.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 221
- Wydruki
- 2
- Wyświetlenia
- 1114
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's a mounting bracket for your vintage Mac SE or SE/30 to install a BlueSCSI v2 in the expansion port on the back. This makes for easy access to the SD card slot, just remove the slot cover from the rear housing. I especially like this design because the BlueSCSI just snaps in – the only fasteners you need are for securing the bracket to the metal chassis. Print the bracket with solid filament for a stealth look, or print with translucent filament (like in the photos) so you can see the BlueSCSI's LEDs.
There are two brackets as the dimensions of the BlueSCSI v2 have changed. Make sure you print the right one, and also note that you'll likely need to enable supports in your slicer (for the SD card slot and the PCB latches).