1 / 3
Mac SE and SE/30 BlueSCSI v2 Expansion Port Bracket — image 1
1 / 3

Mac SE and SE/30 BlueSCSI v2 Expansion Port Bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A bracket for the Mac SE and SE/30 to mount a BlueSCSI v2 in the expansion port for easy SD card access.

Rating
5 / 5
Likes
15
Downloads
221
Makes
2
Views
1,114
Reviews
3

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Here's a mounting bracket for your vintage Mac SE or SE/30 to install a BlueSCSI v2 in the expansion port on the back. This makes for easy access to the SD card slot, just remove the slot cover from the rear housing. I especially like this design because the BlueSCSI just snaps in – the only fasteners you need are for securing the bracket to the metal chassis. Print the bracket with solid filament for a stealth look, or print with translucent filament (like in the photos) so you can see the BlueSCSI's LEDs.

There are two brackets as the dimensions of the BlueSCSI v2 have changed. Make sure you print the right one, and also note that you'll likely need to enable supports in your slicer (for the SD card slot and the PCB latches).

Tags