1 / 1
Black Brant Model Rocket Replacement or Upgrade Parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement/Upgrade parts for the Estes Black Brant Rocket Kit
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Update: Flew this on Easter Sunday and it flew like a dream. I used a B6-6 and it seamed under powered. Next flight, will be on a C6-5. SEND IT!!!
These are parts I designed to upgrade my Estes Black Brant kit. These were printed in PETG 0.2 layer height, 25% infill, and optional supports on the nosecone shoulder.
- Nosecone - fairly accurate replacement with a threaded shoulder for the ebay cap
- Ebay Cap - threads onto the shoulder of the nosecone with vent holes. Stuff your Estes altimeter in there
- Ebay Ring - you can use this to convert your existing Estes nosecone into an ebay
- Fin - print this flat for strength, upright to maintain the airfoil shape
- Centering Rings - simple replacement rings with a small hole to allow for a Kevlar shock cord
- Retainer Ring and Cap - I never use motor clips. You can sub out the tail cone for this. They don't look as nice but they are nicer than clips. Use them for something else.