Lulzbot TAZ 5 40mm hotend fan and BLTouch mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod to add both a 40mm hotend fan, as well as a BLTouch. This is attached via longer versions of the screws that hold…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mod to add both a 40mm hotend fan, as well as a BLTouch. This is attached via longer versions of the screws that hold the extruder down to the carriage.
Once a BLTouch is mounted, it will be approximately 3mm higher than the stock TAZ 5 nozzle. This is not high enough to avoid the front left bed holddown. A 2mm thick replacement is included.
Requires:
4x 3mm heatset inserts and appropriate length screws
2x 4x25mm screws (and optional washers) to replace existing screws
1x Flathead 3mm screw for bed holddown.
Category: 3D Printer Parts
