1 / 4
Lulzbot TAZ 5 40mm hotend fan and BLTouch mount — image 1
1 / 4

Lulzbot TAZ 5 40mm hotend fan and BLTouch mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mod to add both a 40mm hotend fan, as well as a BLTouch. This is attached via longer versions of the screws that hold…

Rating
0 / 5
Likes
2
Downloads
17
Makes
1
Views
124
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Mod to add both a 40mm hotend fan, as well as a BLTouch. This is attached via longer versions of the screws that hold the extruder down to the carriage.

Once a BLTouch is mounted, it will be approximately 3mm higher than the stock TAZ 5 nozzle. This is not high enough to avoid the front left bed holddown. A 2mm thick replacement is included.

Requires:

4x 3mm heatset inserts and appropriate length screws

2x 4x25mm screws (and optional washers) to replace existing screws

1x Flathead 3mm screw for bed holddown.

Category: 3D Printer Parts

Tags