1 / 4
2020 V-slot pad for 3mm Acrylic Panel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V-slot pad for 3mm acrylic panels.
- Ocena
- 5 / 5
- Polubienia
- 214
- Pobrania
- 524
- Wydruki
- 1
- Wyświetlenia
- 3222
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (341)Powiązane
I built my enclosure with V-slot 2020 Aluminum profiles and 3mm Acrylic Panels. Because the slot is 6mm wide, the panels were not very firm within the profiles, so I built these gaps.
They also work in reverse, as a regular slot cover :)
Print settings:
- Material: 98A TPU
- Layer height: 0.3mm
- Line width: 0.7mm
- Vase mode
Increase the length as necessary. I printed them pointing upwards so I could get print them in vase mode. The print gets less stable as it goes upward, so lower speed as needed.