1 / 2
2020/3030 Wago extrusion mounts for 2, 3, and 5, terminal blocks — zdjęcie 1
1 / 2

2020/3030 Wago extrusion mounts for 2, 3, and 5, terminal blocks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A variety of Wago 222 series housings to attach to 2020 or 3030 extrusions

Ocena
5 / 5
Polubienia
39
Pobrania
280
Wydruki
4
Wyświetlenia
859
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

A convenient way to attach wago 222-41x connectors to your printer's (or other) extrusion. Uses M6 hardware as that's what my Ratrig vcore uses everywhere, and allows for mounting of between 1 and 3 wago terminals with 2, 3, or 5, connections. The original model was great but I needed more connectors, and figured I might as well make the other variations while I was at it.

No special printing needed, these should print without supports, and there are variations for mounting with the terminals aligned horizontally or vertically with respect to the mounting screws.

The model can be found at https://cad.onshape.com/documents/dc24b0893fd17d4a37b91f10/w/8acdb11f97bf6f120297d156/e/0d25b6d3ee9c5b88c8d7c94c?renderMode=0&rightPanel=variableTablePanel&uiState=65fd7fcfa9ad1f4380f369a3 if you want to remix, create a crazy one with space for 10 terminal blocks or something similar. I've used the following values as parameters for the blocks I have:

Connector counttotal_lengthtab_border
213mm3mm
318.5mm3.75mm
527mm4.5mm

You can also change the hole size and distance from the edge walls with the obvious variables, in case you want to use smaller fittings than the M6 ones I've used here

Tagi