1 / 1
Engineer's Knurled Thimble
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This thimble is designed to look like how I imagine one might if turned on a lathe.
Not tapered along its whole height, so maybe more suitable for stubby fingers!
Adjustment
The model's internal diameter is 16.6mm - to change the fit:
- Measure fingertip along its wider dimension
- Divide measurement by 0.166
- Set scale in slicer by result (or scale only in X and Y to set a different height.)
Printing
Around 0.07mm layers gives the sharpest print results with grippier knurling.
Shiny filaments give a good look.
The examples shown are printed in PLA and PETG, but flexible filaments should work very well also; If the hardness is very low then scaling down a tiny bit more may improve the fit.