Liczymy pasujące modele…
It is ergonomic thimble (finger guard) It fits finger rather well, as it is not round in cross-section (similarly to most fingers) It has: -dimples -concave top to push needles -ring guarding somewhat from slippped needle injuries -ribs…
I made 3D model of the traditional thimble used by our grandma.
I couldn't find a good template for routing a mustang vibrato, so I whipped this up. Also has the locations for the bridge thimbles. (just a note about thimbles, these are based on stock thimbles, if installing a mastery they will need to…
Started getting into sewing, and designed a thimble that feels comfortable to me. I included a slot in this to be able to have thimble expand a bit when swapping it between different fingers. Grooves are deep enough to be able to "hook"…
Rope thimble. Easy to adapt (SolidWorks). STL is for 8 mm rope. Category: Sport & Outdoors
Someone asked me for a stackable & modular thimble rack system, so here it is. The idea is to print modules and simply stack them in the order you wish, special variants were made for the bottom and top. There is a version for regular…
This is an experimental idea. Most thimbles are designed for short finger nails. Ths one has a cutout for the longer finger nail to poke through. I'd be interested to know if it works for you. Some rescaling and experimentation will be…
The design for this model was inspired by Cost Plus World Market's Fuji dish. I printed with Inland Wood PLA filament on a MK3s+ and painted with acrylic paint, using satin Mod Podge as a sealer. My intention was to use it as an office…
Holds 25 Standard Size Thimbles with 2 hangers on back and slight lip on front edge to prevent vibration falls.
Thimble with a cutout that can be operated with longer nails. Inner diameter 15mm.
A thimble is a small pitted cup worn on the finger that protects it from being pricked or poked by a needle while sewing . Ideally the thimble slips over the finger, or thumb, or both, to protect your finger from pressing the blunt end of…
The thimble (Fingerhut, foxglove) can be printed without support . An extra ring (extra step) at the top prevents the needle from slipping . The included model is made with FreeCAD and can be adopted. The diameter at the entrance is 15…
Expositor de dedales realizado con bandeja de Ikea http://www.ikea.com/es/es/catalog/products/30242743/ y marco http://www.ikea.com/es/es/catalog/products/80117039/#/90186051 y con diferentes alturas y distancias según tamaño de los…
Needed a thimble for a photo and as I couldn't find any at home, I designed and printed one. Updated files with more sizes: Ø16mm, Ø18mm and Ø20mm
I use these to tie 2 lines together. Such as 2-3mm Dyneema and 5mm double braid for dinghy halyards.
Size: Inside Top Diameter: 65mm Inside Bottom Diameter: 50mm Height: 70mm PLA printing time: 5h 31m Print Settings: 0.2mm Layer height 4 perimeters 20% Cubic infill
Minimalist low poly 3D model of a thimble, designed with clean geometric shapes. Perfect as a decorative piece, for stylized scenes, or as a creative prop in games, renders, or 3D printing. Simple, elegant, and versatile.
This 3D-printed thimble combines lightweight and robustness. The rounded shape fits naturally around the finger and ensures a secure fit, while the strength of the material effectively protects against needlesticks. There are several…
Thimble's accessories inspired by Critical Role Campaign 4! This listing is for the digital .STL files for you to download and print at home on your 3D printer. Model is split for 25cm tall machines, and we recommend to print in FDM. The…
Precision ingenieur'ed paracord lock that does not require additional parts and prints easy and reliably. Will fit 4mm diameter paracords and is very compact in size. Obviously not suitable for safety relevant applications. Assembly…
Will fit 4mm (~1/8") diameter paracords. Eyelet diameter is 7mm (little over ¼"). Obviously not suitable for safety relevant applications. Changelog 2025-02-23 v4 added files for 0.4mm nozzle 2022-03-15 v3 complete redesign with smaller…
The nylon rivets used to secure Core One panels have two parts: a pronged collar, and a pin which goes through the collar. There are several tools on Printables which work by inserting a lever under the head of the pin and pulling it out…
A soviet/ussr style needlecase/sewing kit with 2-4 spools for thread, a separate storage compartment for needles, and a cap that doubles as a thimble. Yes, i am aware the thimble is a little big. It was made to fit my thumb for sewing…
I couldn't find a good template for routing a mustang vibrato, so I whipped this up. Also has the locations for the bridge thimbles. (just a note about thimbles, these are based on stock thimbles, if installing a mastery they will need to…
Started getting into sewing, and designed a thimble that feels comfortable to me. I included a slot in this to be able to have thimble expand a bit when swapping it between different fingers. Grooves are deep enough to be able to "hook"…
N scale shell styled after Thomas in the RWS books post smashing into a station masters house. Fits Bachmann N scale Thomas chassis.
Rope thimble. Easy to adapt (SolidWorks). STL is for 8 mm rope. Category: Sport & Outdoors
Someone asked me for a stackable & modular thimble rack system, so here it is. The idea is to print modules and simply stack them in the order you wish, special variants were made for the bottom and top. There is a version for regular…
Bring your Thimble Cosplay to completion with this Prop set featuring her cute Button, along with her Needle Sword and Pin Dagger. ~BUILDING NOTES~ Included in your download is a zip file containing the Button, Pin Dagger (Pommel, Body,…
A wire thimble designed for the end of an end-fed half wave long wire antenna and associated counterpoise. It is sized to accept flexible 22AWG wire. The area along the curve is open for easy manipulation and feeding of the wire. It is…
A grooved low-friction ring (soft-shackle / lashing thimble style) sized to your line for smooth, chafe-free runs. The default fits 4–16 mm line; match your exact size free at marinelab3d.com . NOTE: 3D-printed rings are for light rigging…
looking to keep practicing the CAD program, so these contests are great for that. so many great ideas.. this thimble was just a good excuse to draw. after I printed this.. I realized that using PETG would have been better for strength at…
https://www.instagram.com/kuleshow/ 🪡🧵🧶 Take care of your fingers 👆🩸 Approximately 1.5 grams (0.05 oz) of filament 🤏 Easy print, No support Magic Acorn Needlecase 🪡🧵💕 https://cults3d.com/en/3d-model/gadget/magic-acorn-needlecase
A simple knitting thimble 6 Sizes; 15mm-20mm BOM M3x8 - 1pcs *20230803 Added step file
Thimble or thread for planter or container. 18 cm tall. Resizeable. No supports. Includes file in Fusion 360 format. Print instructions Category: Household Summary Thimble or thread for planter or container. 18 cm tall. Resizeable. No…
This thimble is designed to help hand-sewing, used to push needles and protect the finger. It has ridges to catch the head of the needle/pin. Size it up/down as needed.
I needed to push a needle through my couch. We use a thimble to protect the tender flesh. My injection molded thimble barely fit my pinky. In 30 minutes I had written a thimble, and sliced it. cylinder(r1=10, r2=8, h=20); And soon had a…
Ditale da indossare per il taglio di nastro per pacchi o nastri da carrozziere. Vanno stampati con l'impostazione “supporto” inserita. Le misure sono Small, Medium e Large ma se non sono adatte ingrandite o rimpicciolite con l'opzione del…
Thimble designed for (grandma) person with thick phalanges/fingers. Finger cirumference +-65mm. G-code might need some optimization, the printer had some troubles printing the last layers.
A open thimble to be use with a snap hook Use with the clamp from Bodo https://www.printables.com/model/147380-quick-paracord-rope-clamp-4mm-thimble
Filament: Designed for PLA Infill: 10% Layer hight: First layer 0.3mm, Remaining layers 0.2mm Nozzle: 0.4 Nozzles temp: First layer 215c, Remaining layers 210c Bed temp: First layer 60c, Remaining layers 60c Supports: Yes, Rectilinear…
Finger protector thimble to hold hot/cold objects - print in vase mode with TPU
Nothing special. Normal thimbles never fit me because I have big hands, so I made this primitive thimble for myself, maybe it will help you too with your sewing & embroidery projects. Inner diameter is 20mm. 2024-01-10-13-06-Thimble file…
For cleaning up parts post-printing with an X-acto knife I often am holding the handle in my four fingers and using my thumb to push the part against the blade, this allows for finer control when cleaning (i.e., cleaning brims) and…
Quick easy fun gift. Totally useless for its purpose. Perfect for your mother-in-law.
Inspired by the weird magicks of Monstergarden 's world of war and dark fantasy. It is said their strange geometries channel different arcane energies - battle-healers can be seen waving the bowl-shaped thimbles over lesions, and…
This is a remix from the model from @tmicke that adds a custom enforcer and fliets to avoid sharp edges. Check out the screenshots to see how to load the custom enforcer.
When I once tried to sew buttons onto some boots (to be precise: genshin impact il dottore boots ... cosplay dads will know) at a very inaccessible spot, the thimble fell of my finger all the time and I pricked myself a million times, I…
Old school thimble with new material - TPU Inside diameter Ø ~ 18mm Nozzle = 0.4mm Layer = 0.2 mm Supports = No
A thimble that covers the bottom part of your finger. Prints without supports, though you want to enable brim. This is an OpenSCAD parametric design, customize it here .
this is a thimble which has extra holders built in to hold well on the finger
This is an experimental idea. Most thimbles are designed for short finger nails. Ths one has a cutout for the longer finger nail to poke through. I'd be interested to know if it works for you. Some rescaling and experimentation will be…
Edit Fusion 360 parameter to make a perfect fit on your finger. Best print in TPU
This thimble is designed to look like how I imagine one might if turned on a lathe. Not tapered along its whole height, so maybe more suitable for stubby fingers! Adjustment The model's internal diameter is 16.6mm - to change the fit:…
Meet Thimble , an Easter Bunny unlike any other. While his peers delight in the traditions of Easter egg hunts and chocolate gifting, Thimble harbors a unique fascination: he is utterly captivated by lights. Not just any lights, but those…
Remixed to make the walls thicker because it should be printed at 70% scale to match the size of a collectable thimble. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.15 Infill:…
This improved sewing gauge now allows to print thimble actually fitting your finger (measure the width of your thumb) There is closed model for protection from needle, as well as open for long fingernails. Thimble is then press fitted…
To scale it in PrusaSlicer, add cylinder shape, make it the same size as your finger and scale the thimble until you're satisfied with the fit.
The design for this model was inspired by Cost Plus World Market's Fuji dish. I printed with Inland Wood PLA filament on a MK3s+ and painted with acrylic paint, using satin Mod Podge as a sealer. My intention was to use it as an office…
Standard thimbles drive me crazy so I wanted a ring thimble small enough to just push the needle through thick fabrics but not get in the way. It's sized for my finger (0.5" diameter) but i see no reason why its not scaleable
Thimbles are very handy when making end splices. Yet for some reason I always have the wrong size for the type of rope I'm using….. That's why I made a CAD model. I made 4 standard sizes and included a STEP file so you can make your own!…
I wanted a nice way for my UHMWPE ridgeline for tarp rigging to slide through during tensioning. I'm using these on Tree-loops with eye splices. Designed for this rope:…
