AAP-01 Ghost Ring Charging Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I originally loved the ghost ring design I stumbled upon but really missed having the extended cocking handle, so I…
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 175
- Wydruki
- 0
- Wyświetlenia
- 1496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
I originally loved the ghost ring design I stumbled upon but really missed having the extended cocking handle, so I combined two of my favourite models to create this!
(Apologies for the poor quality photos, the accessory is not currently fitted to my AAP as it is not compatible with the Action Army stock and these are the only ones I have)
This is a remix which combines the ghost ring made by PEWTECH on Cults3D (https://cults3d.com/en/3d-model/gadget/aap-01-ghost-ring-charging-handle) with the screwless charging handle by Thinkscraft (https://www.thingiverse.com/thing:4741163).
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
25% Gyroid Pattern
Filament: ESun PLA+ Any
Notes:
2mm wall thickness for added strength.
You will need:(1) m5x12 mm Flat Countersink Screw
PLA+ will eventually degrade when exposed to UV rays, so PETG or a similar alternative may be last longer.
Post-Printing
Required Hardware
(1) m5x12 mm Flat Countersink Screw
Category: Sport & Outdoors