Roller Coaster Track 1:32
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1:32 scaled roller coaster track. This model based on Expedition GeForce from Holiday Park.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 316
- Wydruki
- 3
- Wyświetlenia
- 2772
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Type: Intamin Mega Coaster
Scale: 1:32
Size: ~ 18 cm x 18 cm x 22 cm
Printer: Original Prusa i3 MK3S+
Settings: 0.2 mm / 30%
Filament: 98 g (Footers: 18 g, Supports: 35 g, Track: 45 g)
Print Time: 12:15 h (Footers: 1:19 h, Supports: 3:51 h, Track: 7:05 h)
Difficulty: Medium
Instructions
I recommend using 1.0 mm wire to assemble the track. This makes the track more stable and easier to assemble. But it also works without wire.
Attention: Some of the individual parts are almost identical. But it is important to put them together in the correct order.
Track
Some parts are marked with a small triangle for orientation. These always point in the same direction (except R12).
Use short wires (1.0mm diameter) and glue to connect the individual pieces.
