Ender CR10S Pro v2 Bed Levelling Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade for the CR10S Pro V2 levelling wheels, inspired by @karloabstrac_1325531 Ender 3 S1 design
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ender CR10S PRO V2 Bed levelling locks that assist in locking the bed levelling for the CR10,
Printed form ABS due to the position in relation to the print bed (dont think PLA would of lasted with proximity to the heat pad or the thermal transfer from the bed screws)
Printed with a 20% infill and with narrow thin tree supports with raft mode enabled, can be printed with PETG using brim mode.
Would recommend printing with teeth/notches facing up, as you'd want that as smooth as possible.
Used a 0.20 layer height but id probably would suggest a 0.16 for the teeth/notches detail.