Airsoft ASG Scorpion Evo M4 Mag Lower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M4 Lower for the ASG Scorpion Evo
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 381
- Wydruki
- 1
- Wyświetlenia
- 4230
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
M4 Lower for the Airsoft ASG Scorpion Evo.
MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED.
2018 and newer Evos are a bit different from the older, pre-2018 Evo.
If you pull back the bolt and your gearbox has the ASG logo, it is most likely 2018 or newer. If it's blank, it's pre-2018
This also disables the empty mag cut-off
What you'll need:
2x M3x20 screw + nut
2x M3x45 screw + nut OR 3x plastic self-Tapping Screws
2x Ball-point Pen Springs
I made some video assembly Guides:
Lower Assembly Replacing the Lowers
You'll need to print one lower, a BB Tube, and A Mag Release + Button.
The Selector shims are not necessary, but recommended to quickly get the alignment right.