Airsoft ASG Scorpion Evo M4 Mag Lower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M4 Lower for the ASG Scorpion Evo
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 381
- Makes
- 1
- Views
- 4,238
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
M4 Lower for the Airsoft ASG Scorpion Evo.
MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED.
2018 and newer Evos are a bit different from the older, pre-2018 Evo.
If you pull back the bolt and your gearbox has the ASG logo, it is most likely 2018 or newer. If it's blank, it's pre-2018

This also disables the empty mag cut-off
What you'll need:
2x M3x20 screw + nut
2x M3x45 screw + nut OR 3x plastic self-Tapping Screws
2x Ball-point Pen Springs
I made some video assembly Guides:
Lower Assembly Replacing the Lowers
You'll need to print one lower, a BB Tube, and A Mag Release + Button.
The Selector shims are not necessary, but recommended to quickly get the alignment right.