1 / 1
Avon S10 respirator decorative port covers — zdjęcie 1

Avon S10 respirator decorative port covers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A snap-fit cover for decorative use, for cosplay/display etc.

Ocena
0 / 5
Polubienia
3
Pobrania
35
Wydruki
0
Wyświetlenia
244
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a port cover for an S10 respirator, intended for cosplay/decorative/re-enactment/airsoft use. It should snap-fit easily, but it might take a little bit of force, depending on filament and printing methods. They fit slightly loose, so might rotate in use, although this shouldn't be a problem.

Two models are included - one with plug in case you only want to use it one side, and have a hose/filter the other. If using without a filter, to get the best airflow I strongly recommend using a cover with holes both sides sides, and remove the secondary speech module on the right-hand side. In my other models there is a tool to assist with this.

Due to the small insets, this really needs printing face-up and with support. The support can be tricky to remove, I use a small metal scraper to remove the remnants from the underside.

Pictured is PolyLite glow in the dark/UV reactive yellow PLA.

Tagi