Avon S10 respirator decorative port covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A snap-fit cover for decorative use, for cosplay/display etc.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 35
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a port cover for an S10 respirator, intended for cosplay/decorative/re-enactment/airsoft use. It should snap-fit easily, but it might take a little bit of force, depending on filament and printing methods. They fit slightly loose, so might rotate in use, although this shouldn't be a problem.
Two models are included - one with plug in case you only want to use it one side, and have a hose/filter the other. If using without a filter, to get the best airflow I strongly recommend using a cover with holes both sides sides, and remove the secondary speech module on the right-hand side. In my other models there is a tool to assist with this.
Due to the small insets, this really needs printing face-up and with support. The support can be tricky to remove, I use a small metal scraper to remove the remnants from the underside.
Pictured is PolyLite glow in the dark/UV reactive yellow PLA.
