1 / 2
Fuji (Fujifilm) X-H2 XH2 X-H2S XH2S Base Plate with Arca-Swiss Adapter — zdjęcie 1
1 / 2

Fuji (Fujifilm) X-H2 XH2 X-H2S XH2S Base Plate with Arca-Swiss Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add an Arca-Swiss base plate to your Fuji X-H2/H2S camera. Versions with and without safety-strap attach loop.

Ocena
5 / 5
Polubienia
11
Pobrania
122
Wydruki
1
Wyświetlenia
1159
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

The Fuji X-H2 and H2S are great cameras.  This new grip expansion provides full support for rapid mount Arca-Swiss tripods, yet doesn't block access to any camera features, such as battery, display etc.  In case you DO want to use a conventional screw-type mount, I've incorporated a hole in the bottom into which you can heat-insert (with a soldering iron) a standard ¼-20 threaded insert.

The photo shows the insert in place.  A suitable heat insert can be bought from here: https://www.amazon.com/dp/B08VGTS2D5

You will need a ¼-20 x 3/8" slotted head (or Philips) screw to attach this grip to your camera. Alternatively you can use this specialty screw, no tool required (shown in the photos): https://www.amazon.com/dp/B00KI3J7G2

Printing is easy, 20% infill is fine.  I used black PLA but it's up to you.  Yes, there are metal units out there to be bought, but I find them heavy and cold to the touch.

One note, you won't need to use supports – there are designed-in easy break-away supports on the bottom.  Once it's printed, simply break them off, leaving beautiful overhang surfaces.

Two versions are provided, one with a safety-strap attach point, one without.  There are also recesses for optional rubber pads for the bottom.  You can purchase rubber grip material: https://www.amazon.com/dp/B0CM5PB8Q9

If anyone wants one made for you, I will provide a ready-to-use unit with the 3d printed base, threaded insert, laser-cut textured rubber pads and special screw for $10 plus postage.  Just message me through this site.  This is NOT a money-making endeavor, just covering my costs (If Prusa wants me to pull this offer, I will.)

Enjoy, let me know how it works for you!

Tagi