Meshtastic Solar Enclosure for the Newpowa 17V Solar Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meshtastic solar enclosure built for the Newpowa 17V NPA5S-12L panel
- Ocena
- 0 / 5
- Polubienia
- 60
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 2046
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
NOTE: This is an early access design (version: alpha1) that has not been fully tested. I'm uploading this early due to interest. YMMV.
Meshtastic Solar Enclosure for the Newpowa 17V Solar Panel (Model NPA5S-12I)
This is a modular enclosure design which mounts directly to the solar panel. It is comprised of multiple parts, giving it a modular design which allows for the enclosure to be adapted to many situations.
The models provided allow the enclosure to be mounted to a sewer vent pipe on the roof of most homes in the USA, making this an easy to install design without the need for adding holes into a roof.
The panel is held at a steep 70 degree angle, allowing for better debris shedding. This seems to provide more than enough power for a RAK 4631 system in longer winter days.
NOTE: The lid will recess a bit. This is intentional, in order to allow for the addition of a yet-to-be-designed gasket.
Bill of Materials (BOM) - Possibly Incomplete!
For the main enclosure box:
- 1x NewPowa 17v panel (model NPA5S-12I)
- 4x machine screws (M5X12) for attaching the box to the solar panel
- 4x screw inserts (M5X10) for the solar panel mount screw backing blocks
- 4x screw washers (M5) for the solar panel mount screws
- 4x split ring washers (M5) for the solar panel mount screws
- 8x (M4X10) for the enclosure lid
- 8x screw inserts (M4X10) for the enclosure lid
- 8x washers (M4) for the lid screws
- 8x split ring washers (M4) for the lid screws
For the main box enclosure interior:
- 12x screws/inserts (M2X4) for the enclosure “sled” posts
- 12x machine screws (M2x6) for the enclosure “sleds”
- 1x N-type female bulkhead adapter (2" pigtail is ideal)
- 1x PG7 cable gland for the solar power cable
For the “sled” contents:
- RAK Wireless 19003 + 4631 LoRa module kit, with bluetooth antenna, etc. GPS is optional and the radio sled incorporates a mount for the antenna if desired.
- Built for the Multi-Chemistry Solar Battery Charger and Sensing Voltage Regulator (MCSBC-SVR-v1.1). A new solar charger that offers more efficient energy harvesting and support for LTO, LFP and Li-Ion batteries. Available on Etsy here.
- Supports 2 lithium titanate oxide (LTO) HTC2265 batteries. Voltaic Enclosures plans to sell these as well.
- 2x zip ties to mount the LTP batteries to the battery sled.
For the mounting bars:
- 4x stainless steel bolts (#10-24x2-½"), or 6x if no antenna mount block will be added.
- 2x stainless steel bolts (#10-24x3"), if an antenna mount block will be added.
- 12x stainless steel washers (#10)
- 6x stainless steel split-ring washers (#10)
For the sewer vent mount adapter:
- 1x stainless steel bolt (#10-24x1”)
- 1x stainless steel wing nut (#10-24)
CHANGE LOG
2025-02-19:
- Opened up license to Public Domain
- Added FreeCAD model file
- Uploaded wall mounting block model file
2024-04-05:
- Uploaded missing “Lid” model file